1. Greater strength and corrosion resistance properties than alloy 800
2. Recommended for use in the prolong high temperature operations
3. Mesh Size: 0.2mesh/inch to 300mesh/inch
4. Wire dia: 0.03mm to 8.0mm
Technical Data Mesh Specification ChartsIncoloy 800H Mesh (UNS No N08810/8811) provides very high creeping resistance and excellent corrosion resistance properties. It withstands higher stress than conventional industrial alloys and resists localized corrosion. Incoloy 800H Mesh is used in chemical and petrochemical treatment, power units, industrial furnaces and heat processing plants.
Incoloy 800H Mesh Properties:
Incoloy 800H Mesh Available Sizes:
Wire Diameter: 0.05mm to 8.2 mm
Aperture size: 0.05mm to 32mm
Sheet width: up to 5000mm
Incoloy 800H Mesh Chemistry:
Alloy | Al | C | Cr | Cu | Fe | Mn | Mo | Ni | Si | S | Ti |
Incoloy 800H | 0.2 % | .05 % | 19.5 – 23.5 % | 1.5 – 3 % | 22 % | 1 % | 2.5 to 3.5 % | 38 – 46 % | .03 % | 0.5 % | 0.6 to 1.2 % |
Incoloy 800HT | 0.85 to 1.20 % | .06 – .10 % | 19 – 23 % | 0.75 % | 39.5 % | 1.5 % | 30 – 35 % | 0.015 % | 1 % | 0.25 to 0.60 % |
Specifications | ASTM B408 |
Density | 0.287 lbs per cubic inch |
Tensile Strength | 110 Kpsi |
Elongation | 32 % |
Melting temperature | 2500 oF |
Highest service Temperature | 1900 oF |
Electric resistivity | 38.9 microhm-in. or 0.989 microhm-m |
Mean coefficient of thermal expansion | 7.9 x 10(-6) inch/inch.oF at 200of or 14.4 x 10(-6) cm/cmoC at93oC |
Thermal Conductivity | 80 Btu-in/ft²-hr-°F at70of or 11.5 W/m-K at 21oC |
Yield strength | 85 ksi or 586 MPa at 70oF or 21oC |